The UP-70DHJ Underground Bullwheel Puller with integral reelwinder is designed for pulling cables in underground ducts. The 8” bullwheels are powered by a hydrostatic drive with a variable displacement axial piston pump and a two speed hydraulic motor. The cable payout is on demand with the bullwheel drive system feeding the pulling rope when any load in excess of 1 lb. is placed on the cable.

In the low linepull range the unit has a continuous linepull of 7,000 lbs and a maximum speed of 75 fpm. In the high speed range the unit has a maximum continuous linepull of 3,500 lbs. and a maximum speed of 150 fpm. In either speed range the linespeed is infi nitely variable from 0 to maximum. The speed control provides excellent inching capability throughout all line pull settings. The storage reel will hold 2,700 ft. of 3/8 in. diameter steel pulling rope. A diamond lead screw automatic levelwind provides for even winding of the pulling rope onto the storage reel. The levelwind is driven from the storage reel and automatically traverses as the reel turns.

A dynamometer gauge is included calibrated in lbs. of linepull with an adjustable overload cut-off that will automatically stop the pull if the preset maximum line pull is reached. The unit is equipped with an emergency stop button and a 20 ft. long pendant cord. In the event the button is depressed all pulling will stop. An 8 inch swivelling rear fairlead sheave is provided to guide the pulling rope into the machine, The sheave pivots through 360 degrees and has a locking screw to set it at any angle.

The Hydraulic Rear Pulling Jib is available to allow extra length of the cable to be pulled. This is helpful in gaining slack in the end of the conductor for making joints in the Manhole. It is also useful for pulling extra vertical length in pad mount installation.

• 7,000 lb. maximum linepull
• 0-150 fpm maximum linespeed range
• 8” bullwheels with 5 grooves
• Reel capacity of 2,700 ft. of 3/8” wire rope
• Rope payout on demand
• Automatic leadscrew levelwind
• Swivelling rear fairlead
• Remote emergency stop button
• Overload cut-off
• Hydraulic rear pulling jib
• Tool box
• 35 hp diesel engine

• 2,000 ft. or 2,700 ft. of 3/8” galvanized steel pulling rope
• Spring driven reel for air hose storage and automatic retrieval, includes 50’ of hose
• Chart recorder kit


• Unit Length: 14’-2”
• Unit Width: 7’-2”
• Unit Height: 9’-8”
• Unit Weight: 6,200 lbs. (approx.)

UP70DHJ Diesel Underground Puller with Hydraulic JIB