The T150-4H/4 is capable of tensioning 1,2,3 or 4 conductors with infinite variable tensioning control. The bullwheels are independently controlled with the ability to be coupled to increase tension capability. The machine is also capable of full pull-back at reduced linespeed.The trailer is equipped with high flotation tires suitable for pulling the unit through sand or swamp land conditions. The frame is fitted with a single point lift to allow lifting with a crane..

Standard Equipment 

• Maximum Pull / Tension 4 x 3750 daN (8250 lbs.)
2 x 7500 daN (16,500 lbs.)

• Maximum Linespeed 5 km/hr (3.1 mph)

Safety Features
• Spring applied / hydraulic pressure released brakes on bullwheel drives apply automatically in the event of hydraulic circuit pressure loss or engine shutdown • Overpull protection to set maximum linepull

• Auxiliary hydraulic circuit (700 bar) to operate conductor press
• Auxillary hydraulic circuits to power and control separate hydraulic reel winder
• Air-ride axle suspension
• Highway lighting
• Air actuated trailer brakes


Tensioner Bullwheel Specifications
• Bullwheel diameter 1500 mm (60”)
• Wear resistant nylon bullwheel segments 5 grooves per bullwheel set
• Maximum conductor diameter 38 mm (1.5”)

Engine Specifications
• Air-cooled brand name diesel engine 82.0 kW (110 hp) mechanical

Drive Specifications
• Fully enclosed planetary gearbox drive Infinite variable speed, linepull and tensioning control Automatic over-pull protection system with linepull gauge
• Heavy duty hydraulic oil cooler
• Replaceable hydraulic oil filters complete with visual dirt alarms

Physical Dimensions
• Weight (Approx.) 9511 kg (20,950 lbs)
• Length (Approx.) 5588 mm (220”)
• Width (Approx.) 2350 mm (93”)
• Height (Approx.) 2310 mm (91”)

T150H72 2-Bundle Two Conductor / Bullwheel Tensioner