Single direction, Model CP16-1-1E

• 2,286 lbs (1,016 daN) maximum linepull
• 6.3 fpm (1.9 m/min) maximum speed
• 0.375” (9.5 mm) synthetic rope
• Manual pin clutch to allow spooling off
• 1 h.p. (0.75 kW) electric motor drive

Single direction, Model CP65-1-1.5E
• 6,500 lbs (2,890 daN) maximum linepull
• 5 fpm (1.5 m/min) maximum speed
• 0.625” (15.9 mm) wire rope
• Manual jaw clutch to allow spooling off
• 1.5 h.p. (1.1 kW) electric motor drive

Single direction, Model CP260-1-15E
• 27,600 lbs (12,277 daN) maximum linepull
• 21 fpm (6.4 m/min) maximum speed
• 0.75” (19 mm) wire rope
• Manual jaw clutch to allow spooling off
• 15 h.p. (11 kW) electric motor drive

A Guide to Car-Pulling Systems
Linepull for starting and moving cars is determined on the following basis:

1. Number of cars to be moved, the weight of the cars and their contents.
2. Track grade or slope and curvature it applicable.
3. Track Ballast and condition.
4. Ambient conditions, temperature etc.

Provide us with the above information along with required linespeed, duty cycle distance car (s) are to be moved, operational details, preferred drive (electric hydraulic engine, etc.) and Timberland can design and manufacture a system to your exact requirements or one of our many existing designs may suit your application.

Single Drum Type:
Single puiling rope fi xed to drum. Drum can be plain faced or grooved, single or multiple layer. Drum can be clutched to
allow “free spool” pulling of rope off drum. No braking is supplied in the pull in direction.

Timberland Equipment can supply a complete Carpuller Package including all accessories:
• Horizontal, vertical or angled deflector and return sheaves
• Deflector sheaves complete with take up mechanisms
• Two speed or variable frequency drive systems for electric powered units
• Wire or synthetic cable and car attachment slings
• Counterweight towers
• Guide and deflector rollers
• Snatch blocks, hooks, etc.
• Travel limit and slack cable warning/shutdown switches.