Bi-Directional Single Winch: Model CP78-1-7.5E
• 7,800 lbs (12,277 daN) maximum linepull
• 24 fpm (7.3 m/min) maximum speed
• 0.625” (15.9 mm) wire rope
• Grooved drum for one rope on-one rope off
• 7.5 h.p. (5.5 kW) electric motor drive

Bi-Directional Dual Winch System: Model CP150-1-1-5E
• 15,000 lbs (6,670 daN) maximum linepull
• 5 fpm (1.5 m/min) maximum speed
• 0.875” (22 mm) synthetic rope
• 5 h.p. (3.7 kW) electric motor drive

Bi-Directional Single Winch
Model CP260-1-25E
• 26,000 lbs (11,565 daN) maximum linepull
• 25 fpm (7.6 m/min) maximum speed
• 1.125” (28.5 mm) wire rope
• Grooved drum for one rope on-one rope off
• 25 h.p. (18 kW) electric motor drive

A Guide to Car-Pulling Systems
Linepull for starting and moving cars is determined on the following basis:

1. Number of cars to be moved, the weight of the cars and their contents.
2. Track grade or slope and curvature it applicable.
3. Track Ballast and condition.
4. Ambient conditions, temperature etc.

Provide us with the above information along with required linespeed, duty cycle distance car (s) are to be moved, operational details, preferred drive (electric hydraulic engine, etc.) and Timberland can design and manufacture a system to your exact requirements or one of our many existing designs may suit your application.

Bi-Directional Drum Type:
Carpuller Operates on a one rope on/one rope off principle. Both ends of rope are fi xed to drum. Drum can be plain faced
or grooved. Pull and braking are supplied in both directions.


Timberland Equipment can supply a complete Carpuller Package including all accessories:
• Horizontal, vertical or angled deflector and return sheaves
• Deflector sheaves complete with take up mechanisms
• Two speed or variable frequency drive systems for electric powered units
• Wire or synthetic cable and car attachment slings
• Counterweight towers
• Guide and deflector rollers
• Snatch blocks, hooks, etc.
• Travel limit and slack cable warning/shutdown switches.